Masquerade costumes from improvised materials. How to make a fireman's hat out of paper How to make a fireman's hat out of material
If a little boy asks his parents to sew baby suit fireman, it means that he was brought up correctly! The child has a clear desire to save people's lives, to do good, to be a brave, strong and confident person. You should definitely support his interest and create an appropriate image for him for the next event.
What does he represent?
The children's firefighter costume consists of several main components:
- The main part of combat clothing is a one-piece jumpsuit. It is recommended that it be red, yellow or brown. Such shades will create the most realistic image.
- Stripes are reflected on the trousers and sleeves, with the help of which the employee can be easily seen in the dark.
- He has high rubber boots on his feet.
- Hands are lined with long impenetrable gloves.
- A distinctive component of a firefighter is a helmet and a gas mask. They will help protect the head and respiratory organs during work.
Separately, it is worth talking about the tool, which should be in the hands of a person. First of all, it is a fire extinguisher and a fire hydrant. He will also need a hammer, crowbar and nail puller. All these devices will help him get into the building.
What is required to create an image?
A do-it-yourself firefighter suit (for children) can be created from a minimum set of material, which, for sure, every housewife has at home.
For this you will need the following:
- white paper for sketching;
- thick cardboard;
- bright felt-tip pens, pencils and a ruler;
- dense fabric;
- scissors;
- threads;
- shiny and phosphorus material that glows in the dark;
- colored paper;
- old CDs;
- stickers with different logos.
All these components will allow you to create a realistic children's firefighter costume for a boy.
Preparation for the main work
Before you create a children's firefighter costume with your own hands, you need to carefully prepare for this process. First you need to imagine how the costume will look in reality and what it will be created from. It is recommended to make it from a dense shiny material. In it, the child will be comfortable and comfortable. It will also bring the image as close to realism as possible.
Next, it is worth depicting on thick paper what the future firefighter costume for children will look like. The pattern must represent a single design. If there is no desire to cut a holistic design, then you can create a combination of a one-piece overalls and a jacket.
The costume making process
The whole process of creating a costume can be divided into several main parts:
- On a sheet of cardboard or directly on the fabric, you should draw a silhouette of the future costume. It is recommended for this to circle the jacket and pants of the baby. It is also necessary to leave a small margin for the seam.
- Next, you should carefully redraw the layout on the fabric (if it was drawn on cardboard) and cut out the future children's firefighter costume with your own hands. Patterns in the future must be sewn with threads.
- On the sleeves and trousers, a stripe of phosphor fabric should be made.
- To make the costume look more realistic, it is additionally recommended to stick discs and logos on it.
- Gloves should be sewn in the same way.
The final part of the image will be high boots.
Creating additional accessories
The image of a firefighter will bring real pleasure to a child if he has accessories corresponding to this profession in his hands. First of all, a fire extinguisher will be needed, with which he will extinguish fires. This will require cardboard cylinder, paste over a large plastic bottle or a paper layout with newspapers. As soon as the structure dries, it should be painted with red paint. You can also buy a similar product in a toy store. The rest of the inventory can be created in a similar way from thick cardboard, paints and colored paper.
What do you need to make a helmet?
A firefighter suit won't look complete without a helmet. To create it you will need:
- cardboard, preferably of small thickness;
- scissors and a paper knife;
- paints;
- one big balloon;
- newspapers or thin paper;
- wide adhesive tape or glue;
- foam rubber.
Once everything you need is ready, you can proceed to interesting work - creating a helmet.
The helmet making process
The process of creating a helmet can also be divided into several main stages:
- First of all, you should make a basis that will determine the future size of the headgear. It can be constructed from foam rubber. However, it will be much easier to do this from hot air balloon. It should be inflated to such an extent that it is slightly larger than the size of the head.
- On top of it, with a dense layer, it is required to glue paper or newspaper in such a way that a dense frame is obtained, this can be done with adhesive tape or glue.
- Once the base is ready, it should be dried and painted with red paint;
- If necessary, seal the collar area with cardboard.
- Now, it remains to cut holes for the neck and face with a knife.
A beautiful helmet is almost ready, it remains to burst the ball and carefully remove it. Additionally, you can decorate this accessory with paints. Patterns must first be depicted on templates. It is also recommended to cover it with a shiny varnish so that it becomes brighter and acquires a rich color.
The children's suit of the fireman will bring to the child a lot of positive emotions. He will remember this event for a long time. Of course, you can buy a ready-made suit in a holiday, workwear or souvenir shop, but it is much cheaper, more interesting and faster to create this product with your own hands with a little helper.
Children love to fantasize and dream. In their dreams, they become doctors and actors, astronauts and policemen. Is your son aspiring to be a firefighter? Rejoice - he is ready to fight the fiery element.
Give your little one a piece of happiness - sew a fire tamer outfit and you won't be disappointed.
A firefighter suit is a great choice for kindergarten for a matinee, especially for a boy.
The basis of the equipment of the lord of fire is a jacket and trousers of bright red, yellow or light brown. The selection of a specific shade is best left to the future firefighter, which will give him pleasure and give confidence and joy from working together.
On the feet of a firefighter, you need to choose the right shoes. It can be low boots, boots, berets. On the hands - long waterproof mittens or leggings. Ideally, they are sewn from canvas or rubberized fabric. But despite the fact that the child needs a costume to play, you can use light thin leather, leatherette, etc.
The final touch in the clothes of a young fire tamer is a helmet or helmet made from improvised materials and decorated with a special cockade. As a set, they will help the hero protect his body when extinguishing a fire.
It should also be remembered about the accessories necessary for a fireman in his work. These include a gas mask, a walkie-talkie, a fire extinguisher, a hatchet that attaches to a belt.
What do you need to make a suit?
To form a heroic image of a firefighter, it is enough to buy all the necessary attributes on the market or in a special store. But a set of clothes, sewn with your own hands, will become the pride of your child. Therefore, you first need to prepare suitable materials for work.
For the most realistic looking fire tamer you will need:
- 2-3 sheets of thick white drawing paper 1x1 m in size;
- thin cardboard;
- pencils, ruler, scissors, pins;
- watercolor or gouache paints;
- thick fabric for jackets and trousers;
- PVA glue, threads, needles, stapler;
- ribbons 3-3.5 cm wide in contrasting yellow or red, preferably with a luminescent coating;
- stickers with logos of the Ministry of Emergency Situations, 01.
Having prepared everything for work, you can begin the process of cutting and sewing a masterpiece.
Stages of creating a children's fire uniform
First of all, you need to mentally see the finished outfit, its shape, color. Then turn your project into reality.
For him you need:
1.Take measurements from the child.
2. A sketch of overalls is applied to paper according to the measurements taken. If there is a desire to make a surprise for the child, it is possible to transfer the sketch from the appropriate clothes of the baby. At the same time, the sleeves and legs are made a little looser than on the sample.
3. The made drawing is cut out and with the help of pins it is pricked on the prepared canvas. The outline is outlined in chalk.
Attention! When making an outline, one should not forget about the tolerances for seams with a width of 5-7 mm, depending on the density and flowability of the material.
4. The workpiece is cut along the line. Then it must be swept away and turned on the front side.
5. Ribbon stripes in a contrasting shade, preferably with a luminescent or silver coating, are located on the sleeves, chest, back and trousers. They also need to be baited; hide the edges in the side seams. Check the accuracy of the fit of the ribbons, flash with a double stitch.
6. C wrong side Sew and overcast seams using a sewing machine. Stitch the cuffs, the bottom of the jacket and trousers. Attach collar.
7. Tuck the belt of the trousers and hem. Put on a rubber band.
8. To make the tailored firefighter uniform look more real, stick the EMERCOM or 01 logos on the chest and back.
Making a headdress
A helmet or helmet will protect the young EMERCOM-nick from injury while extinguishing a fire. Therefore, its creation must be approached with all seriousness.
First of all, measure the circumference of the boy's head, clasping the forehead and the back of the head. This will be the base of the product. To find out its height, the gap from the forehead to the middle of the crown is measured.
On a cardboard draw two parallel lines corresponding to the girth length + 2 cm and fasten the edges with a stapler or glue. The result is a ring.
Now we need to draw triangles, where the base is 2 cm, and the length of each side is equal to the height of the headdress + 2 cm. An isosceles triangle is obtained. Carefully cut out the petals with scissors and glue them to the prepared rim. The result is a crown with identical teeth.
To assemble the frame, you need to connect and glue the tops of the petals. After the connected parts have dried, paste over the workpiece with whatman paper and paint it red with gouache. Attach a cockade in front.
The balaclava is cut from the same canvas as the main decoration. It is attached at the back along the bottom of the finished helmet and should reach the middle of the shoulder blades, while covering the neck.
Accessories
To bring more joy and pleasure to the child, the decoration of the fire extinguisher must be provided with proper equipment. First of all, this is a fire extinguisher, which can be made from a plastic bottle pasted over with bright red paper.
Cut out an ax from painted cardboard, buy a walkie-talkie in a toy store. Attach all these attributes to the belt that girdles your firefighter hero.
Participating in the process of sewing a fire tamer uniform, the kid will get real satisfaction. His dream came true, he is a real fireman. And let this costume not look as elegant as bought in a store. The main thing is that it is made with your own hands, albeit with the help of your parents.
If your child at school or in the garden was given a creative task to make some fire-themed crafts, do not rush to get upset and fall into despair. This, although a particularly simple task, is definitely interesting. In addition, the profession of a firefighter is very useful in life. Having completed crafts with your son or daughter, which, in some way, are related to the subject of fire safety, you can learn the basic rules for behavior in a dangerous situation in a playful way. It will also be possible to clearly explain to the child how the fire service works, and also what needs to be done to prevent such an unpleasant situation. Both boys and girls will be extremely interested in learning more about the work of firefighters, as well as fire equipment, and, of course, about the large and powerful equipment that is used to extinguish fires.
How to make a firefighter costume for a child?
With clothes, most likely, there will be no problems - any dark overalls will do. The main thing is to make a fire helmet correctly. The best material for making a firefighter helmet is cardboard. Firstly, this material is environmentally friendly and clean, and secondly, it is quite easy to work with it. And do not forget that the cost of cardboard in the choice of material for a fire helmet also definitely plays an important role.
Materials and tools for creating a fireman's cardboard helmet
You will need to take a two-mm cardboard. In principle, it is possible to have a smaller thickness, but then it will be more difficult to work. You will also need scissors, a paper knife and paint with brushes. You will need foam. By the way, it is possible to use a foam sponge for washing dishes for this. You can not do without a fabric of silver or dark color, but always with a metallic sheen. For measurements, a centimeter is useful. Will need plain paper and a pencil, as well as a plastic bottle for the visor. It is not necessary to do it, but then the styling will be more complete. A wide silver-colored tape is also useful. They make luminescent stripes on the helmet. You will also need thin paper, or old newspapers.
Advice
First, the volume of the head for a fire helmet is measured, since the product is made individually. Measurements are made from the back of the head to the forehead, directly along the entire circumference of the skull. It is also necessary to measure the distance from the bottom line of the forehead, that is, from the eyebrows to the center of the parietal part. This will calculate the height of the helmet.
The next step is drawing the helmet template on paper.
A straight line is drawn on a piece of paper with a pencil, equal to the circumference of the child's head plus 3 centimeters. Next, you need to step back 2-3 centimeters up and draw a parallel line of the same size. They need to be cut out and transferred to cardboard in order to make a similar part from it. For cutting on cardboard along the contour, it is better to use a clerical knife. The cuts will become smoother, and the process itself will be greatly simplified. After that, you should fasten the ends of the cardboard strip with a stapler or with glue, before checking the volume with the size of the baby's head. The result is a cardboard ring - this is the basis of the frame of the future fire helmet.
Further, a long, isosceles triangle is drawn on paper, its base will be about 1.5-2 centimeters, and the length of each side is equal to the height of the helmet. It was measured and calculated earlier - this is the distance from the eyebrows to the parietal part. And plus 3 centimeters allowance for this indicator. Thus, it gets a narrow, long triangle with 2 equal sides. By the way, the more such triangles are made, the more even the dome of the helmet will become.
The template is transferred to cardboard and the required number of parts is cut out. Calculating it is simple: the circumference of the head is divided by the base of the triangle. Thus, the helmet shell will be formed.
Gathering into one
The triangles obtained earlier are glued to the frame, and a crown-like blank is obtained. After that, you should collect the dome. The task, of course, is long and painstaking. The triangles glued on the frame earlier should be bent in the shape of a dome, then glued together, as well as in the center. So the frame of the future fire helmet will be formed. After this, you need to let the paper blank dry. The main part of the headgear for the little fireman is already ready. After that, it is decorated, and a visor is cut out of the bottle.
Conclusion:
In order for a child to play the role of a fireman at a carnival or matinee, he can make a fire helmet. To do this, you need paper and appropriate tools. Many children are fond of fire topics, so this will be interesting for both boys and girls.
Crafts on a fire theme
DIY fire truck
Crafts on a fire theme
A pleasant event unexpectedly descended - a masquerade ball! You don't have the time or money to order at the atelier, run around the shops in search of original costumes! What to do?! Well, firstly, calm down, secondly, remember that we can do everything with our own hands, and thirdly, look around. What do we always have at home? Right! Plastic bottles, newspapers, trash bags, boxes. From this we will make the most original carnival costume with our own hands.
From plastic bottles
Mermaid or kikimora
The most beautiful place on a plastic bottle is the bottom. We cut a lot of them right away. They will decorate the hem of the dress, the bodice, you can glue the original crown out of them. For a mermaid or kikimora costume, we need green bottles.
After the bottoms have been cut off, you still need to cut off the necks, and then carefully and evenly cut the remains of the bottle lengthwise into three equal parts. Burn small holes in the narrow part and collect them on a string into a garland that will become a skirt. Glue, sew or staple the bottoms along the edge of the skirt.
The bodice of the dress is best made by sheathing the old T-shirt with green plastic details. But the crown can be assembled from lush feathers cut from bottles and attached to a hoop or ribbon.
flower princess
The stand-up skirt for this costume is made from a wire frame. Any thin fabric is stretched on it. This is where the difficulties end and the creative part begins. Cut out petals from bottles of different colors, collect them into flowers and attach to the skirt. Cut half-liter bottles in a spiral and attach the "serpentine" to the skirt.
A costume from improvised materials for a boy can be made by simply tying together two plastic bottles and attaching them upside down to the astronaut's back with straps. And in order for our jetpack to be operational, glue red-orange patches imitating fire into the necks with your own hands.
Helmet, hat, crown
The largest plastic bottles are simply specially produced in order to make various hats for a hero, an alien, a king, a gentleman, a puss in boots, etc. out of them.