Summer crocheted iris beret. Openwork crochet beret: diagram and description. Crocheted openwork summer beret. How to knit a warm beret for the winter
- Classic style. We recommend combining a blue beret made of any wool or felt with a raincoat middle length and high boots or loafers. The raincoat should be a classic beige color. A long coat made of wool or cashmere also goes well with a classic beret.
- Casual style is well complemented by a large, voluminous beret. Pair it with a leather jacket, denim trousers, sweater or leggings. Plus large boots or boots with a thick platform.
- Retro style is unthinkable without a beret - a pill. Combine this beret with a new look dress, or a flared knee-length skirt. Ballet flats, low-heeled ankle boots or pumps will go well with this look.
How knitted berets match your face type
If you have a round face, designers advise moving your headdress to the back of your head and leaving your curls loose, thus framing your face and making it visually more elongated. Unless of course you are happy with your rounded face shape.
For those who have an angular or square face, stylists recommend wearing the beret shifted to the side. It is better to partially hide the bangs or pin them with bobby pins.
The beret fits almost any face type, the main thing is to find your shape.
Crocheted berets for women, models from our website
As we wrote above, berets are very different. And needlewomen create knitted berets in any style..
Knitted beret for women in the style of Irish lace, master class!
Hello, dear women! Ah, summer, summer……….. it’s time to show off your work on your body! New job mine is a summer beret in the style of Irish lace. Idea by Zoya Leporskaya from Fashion Magazine No. 541. Author of the work: Nadezhda Lavrova.
Knitted a beret for women from leftover yarn. Flowers, leaves and a rim are made of half-wool, the mesh is knitted from thin cotton threads. Hook, 1mm, 2mm and 1.75mm. The headband (elastic band) is knitted with concave and convex stitches with 1 crochet. The last row is made with a smaller crochet hook up to the volume (56 cm) of the head.
The beret pattern for women has 2 circles: outer and inner. The diameter of the outer circle (bottom) is as you wish (standard 28-30 cm), and calculate the inner one using the formula: head circumference minus 2 cm for a tight fit, divided by 3.14. If you have a standard head circumference size of 56 cm, in this case (56 cm - 2 = 54 cm): 3.14 = 16-18 cm. You can increase or decrease your size according to your wishes. I tried to show the whole process in photographs. The elements are easy to knit, I have attached a diagram. I wish you all successful work, health and patience.
Tie the elements of a beret for women: flowers and leaves according to patterns 1 and 1a:
Arrange the finished elements on the pattern, creating a composition. Secure them with pins wrong side up.
Fill the empty spaces with an irregular mesh ( or in ).
Once the pieces are assembled, remove the pins and detach the fabric from the pattern. Along the edge of the side, tie a headband - an elastic band made of convex/concave double crochets.
Summer knitted beret for women
Summer beret for women “African flower”. Made from white mercerized cotton and orange cotton yarn. Size 54-55 cm. Hook No. 2. It took about 80 g. The work uses a pattern of a 6-corner motif “African flower” - 7 motifs connected to each other during the knitting process. No description. I offer it for viewing. Work by Anna Chernova.
Beret for women “Cosmeya”, made using the “freeform” technique from several types of yarn, classic and fancy. The headband of the beret for women is knitted in a circle, i.e. the beret is without a seam, it can be put on by turning it on either side, as desired. The exquisite combination of cool lilac, pink and gray shades is very impressive. Freeform motifs are connected or stitched together. The work used generally accepted patterns - caterpillar cord, T. Vashina's ties, “popcorn”, postal column, crab step, Tunisian knitting and other technical techniques. Work by Svetlana Shevchenko
Hello, dear friends. Contacted another set of berets for women + openwork scarf. I am sharing with you a description of the beret and a pattern of the scarf. The brooch was also made by me. Work by Elvira Vyazalova.
Crochet beret for women description
Viscose yarn from Magic, hook number 3. On OG 56.
Cast on a chain of 6 chains. p., close it in a ring. Knit 15 tbsp into the center of the ring. s/n. Next, knit a circle with a diameter of 25 cm, evenly adding 15 sts in each row. s/n. After this, knit 4 rows without increments. Next, knit 3 rows of st. b/n, decreasing every 5th loop. Then knit 6-7 rows of elastic in relief and stitches.
Beret for women “Crane”, made using the freeform technique from several types of yarn, classic and fancy. The bottom and brim of the beret are knitted from various volumetric motifs and homogeneous sections of fabric (Tunisian knitting, single crochet, etc.), the rim of the beret is made of convex and concave columns, and there are decorative lush columns along the edge. Work by Svetlana Shevchenko.
Turquoise hat is crocheted using the “broomstick” method from 100% wool Bianca Lana Lux 100g/240m color No. 866 - turquoise. Artwork by Nina Kolotilo.
The lining is knitted from the same wool with double crochets. The elastic is cast on with 104 loops using an elastic cast-on with a 2.25 clover crochet hook, the height of the elastic is 5cm. Then 2 stitches are knitted from each loop. + 2p. added during the process. It turned out to be 210 loops. The broomstick was knitted on a plastic ruler 3cm wide.
Crochet beret for women using the broomstick technique:
Beret for women “Blue Sea”, crocheted
Hello, my name is Olga. This is my first time submitting my work to the competition. I am 25 years old, raising a son. I love crocheting and crocheting hats. I called this work “Blue Sea” because the colors are so bright and saturated.
Knitting a hat for women is very easy.
I knitted with BABY threads from VITA (composition: 100% acrylic, 400 m/100 g), one skein of blue and blue.
Hook No. 2.5. Almost the entire skein of blue was not used for the whole beret, but only half a skein of blue. The alternation of stripes is as follows: a row of blue and 2 rows of blue, etc.
Description of work: I make 3 air loops and close them in a circle, then I tie 12 dc into the ring (3 vp rise)
Row 2: 24 dc.
3rd row: we make an increase to each column in relief, thus:
I knitted for size 51 cm. Thus, I knitted the bottom according to the pattern up to a diameter of 25.5 cm. Then I knitted 3 rows without increases.
Then there are decreases in loops: in the same way as additions. We decrease until the beret measures 28 cm when folded in half. Then we knit a sc for 5 cm.
Note: when knitting begins, RLS, the size of the hat decreases; out of 28 cm, I got 25. I did the binding in a crawfish step. I also knitted a flower brooch. It is attached to the back with a pin and can be removed if necessary.
Description of the flower: cast on 3 vp, connect into a ring: then 15 sc into the ring. 3 sc per petal. The petal is knitted like this: 5 chain stitches, then in the next loop 2 stitches with 5 crochets, in the next loop 5 chain stitches, a connecting stitch. And then follow the same principle for the remaining petals.
Also, in the back of the ring where the bottom began, I tied 2 flowers on a chain made of VP. It’s knitted like this: cast on a chain of VP 12 cm, 3 VP instep and connect it into a ring to the last loop of the chain, and knit the petals in the same way as for brooches, only 3 VP instep and down, and the petals in double crochets.
Good afternoon My name is Guzel Fattakhova, I have been crocheting for myself and to order for a little over 2 years. Once I already sent my work - a sexy tunic with a spider web. This time I decided to show my summer openwork berets for women. I knitted many of them from the head, so there are no patterns for them. There is a diagram for only one (attached).
A beret for women, tied with lush columns - Irina's work.
ALIZE maxi threads (25% wool, 75% acrylic) - 100g/100m, 1.5 balls were used, hook number 2.
- 1st row - in a ring (2 times around the finger) 12 lush stitches, you can dial 3 chain stitches for lifting, but it’s better to just pull out a long loop.
- 2nd row - 24 lush columns (the columns will look like a tick).
- 3rd row - in the tick of the previous row there are two lush stitches (you will also get a tick), and in the space between the ticks, a double crochet behind the back wall. In general, the row looks like this: tick (2 lush stitches in the middle of the previous one, 1 treble stitch behind the back wall, 2 lush stitches).
- 4th row - tick, on the previous treble treble, tie 2 treble treble behind the back wall - this forms a beret wedge. tick...
- Row 5 - tick, on the previous two treble crochets we knit 3 treble crochets (to get straighter wedges, we make additions on the last treble crochet, i.e. knit all subsequent rows on the last treble crochet) /n of the previous row - two. To make it in a spiral, we make an increase at the beginning of the wedge (checkmark, on the dc/n of the previous row there are two dc/n). 6th row - tick, 4 dc/n.
We make increases to the desired diameter, knit a row without increases - you can do more if desired, and then we start making decreases - there are two wedge decreases in a row at once, so that it is even (but you can do one at a time - at the beginning or at the end).
The number of wedges can be chosen arbitrarily - 6,8,9,12. But the more wedges, the rounder it takes.
When the diameter of the circle reaches 24 cm, finish the increases and, having knitted 2 cm straight, begin the decreases, distributing them evenly along the same lines where the decreases were made. When the diameter of the inner circle is 18 cm, knit another 2 cm straight. Next, proceed to decorating the beret with an applied applique. To do this, knit motifs of large flowers according to patterns 79a, 79c, 79d, 79e, then flowers and motifs of medium size according to patterns 796, 79e, 79g, 79i, as well as small flowers and leaves according to patterns 79z, 79k.
Create a composition by placing larger motifs along the side and the area of the straight knit, and smaller ones along the wide part of the bottom and in the spaces between large motifs. Sew the motifs to the canvas with wool thread. The next step is to knit the inside of the beret with cotton thread. Carry out the work in the same way, but knit the bottom to a circle diameter of about 22 cm, then straight to a height of 3 cm. Then begin the decreases, distributing them evenly along the same lines where you made the decreases. When the diameter of the inner circle is 18 cm, finish the work. Place the cotton piece inside the wool piece and make a sc stitch, connecting two layers of beret with cotton yarn, then the 2nd row of sc with wool thread to the circumference of the loops of the previous row.
The beret is crocheted using the Irish lace technique. An excellent hat for the summer: bright, playful and elegant.
To crochet a women's beret you will need: CoCo yarn (100% cotton, 240 m/50 g) - remnants of yellow, blue, dark blue, purple, turquoise, red, green, melange and black, hook No. 2.
How to knit a beret for women
Attention! Before starting work, make a life-size hat pattern of the size you need.
Knit flowers from multi-colored yarn according to pattern 1, from green yarn knit leaves according to pattern 2. Knit 1 poppy flower according to pattern 3. Lay out all the elements of the composition on the beret pattern, secure with needles. Fill the empty spaces between the elements with an irregular mesh of melange thread.
Then tie the band of the beret with turquoise thread in single stitches in a circle, evenly decreasing the loops until the required size (head circumference) is reached.
Knitted beret for women from a Japanese magazine
A very delicate and feminine beret is knitted from hexagonal and pentagonal motifs.
You will need: 100% mercerized cotton yarn; hook No. 2.5.
Below is a diagram of the implementation of motifs and options for their connection.
Dimensions of hexagonal motif A: 6 x 7 cm; pentagonal motif B: 5.6 x 5.3 cm.
For knitting you will need: 80 grams of wool yarn and hook No. 2 - 2.25 mm.
It is necessary to knit 25 hexagonal and 6 pentagonal blanks. It is necessary to knit the parts into one fabric while completing the last row. When all the motifs are connected together, it is necessary to tie them around the edge, as indicated in the diagram, securing the st s/n and st. b/n in arches from v.p. Next we knit seven rows of st. b/n.
In the last row we perform a picot in every 4th loop.
Hexagonal motif
- First r. In an amigurumi ring of 6 loops we knit arches from 2 vp, securing them with two sts. s/n with a common top and base.
- Second r. In each top of two st. s/n we knit (1 tbsp. b/n + 5 ch. + 1 tbsp. b/n), in arches from 2 v.p. knit 2 tbsp. b/n.
- Third r. In arches of 5 vp. knit (4 tbsp. s/n + 2 vp + 4 tbsp. s/n). Finish ss.
- Fourth r. In Art. knit s/n *3 tbsp. b/n, then 5 vp. above the arch of 2 vp, 3 tbsp. b/n, ch 3, skip 2 loops, *. Continue from *.
The beginning of knitting is the top of the beret. We knit in accordance with the pattern until the diameter of the circle is 24 cm, increases are made due to the rows from st. s/n, namely due to those Art. s/n, which are knitted between st. s/n and “lush” column. Next, knit 2 cm without increasing, then begin to decrease the loops until the diameter of the beret reaches 18 cm. When making decreases, alternately knit a “lush” stitch in each loop and through the loop of the previous row, knit a st in between them. s/n. After this, knit 2 cm straight for the band.
Tie the beret next to the st. b/n and next to the “crawfish step”.
Crochet beret for women, video tutorials
An openwork beret for women can be crocheted not only according to the pattern, but also according to the video tutorial.
Summer beret for women, crocheted
For knitting you will need: Pelican yarn (100% cotton; 330m/50g), hook number 4 and 4.5. The beret is knitted from the bottom up, from the band.
The video should load here, please wait or refresh the page.
Openwork honeycomb beret for women, crocheted
Let's knit another summer openwork cotton beret. Anyone can do it, even a novice needlewoman! Knits up easily and quickly!
The size of the beret is 56-58 cm. Made from Pekhorka Pearl thread (425 m / 100 g; composition: 50% cotton, 50% viscose). Hook No. 2.
The video should load here, please wait or refresh the page.
A light knitted beret will not only be beautiful and stylish, but also a useful addition to a woman’s wardrobe. It will perfectly protect your head from overheating and ultraviolet rays, and that is why it is recommended to choose light-colored materials for summer hats. Quite often, summer berets are crocheted for girls; they are quite comfortable to wear and will not leave any little fashionista indifferent.
Crochet summer berets: how to determine the beret size
A knitted beret consists of a bottom (round base), walls and a band (the part that fits the head tightly). To determine the size, it is recommended to take a measurement with a centimeter tape - it should be taken 2 cm above the eyebrow line, behind the ear (slightly higher), through the most protruding point of the back of the head in a circle.
The height of the band is usually from 1 to 10 cm, the height of the walls is from 3 to 10 cm. The approximate height of the headdress and its diameter in accordance with the age of the person can be found in the table:
Making a simple openwork beret: a detailed master class
This model is suitable for beginner needlewomen. You will need 3-4 skeins of white cotton yarn (“iris”), hook No. 2, and a measuring tape (we measure the circumference of the head).
First you need to cast on 5 air loops (v.p.) and close them in a circle connecting post. Having knitted 3 lifting loops, we begin the first row with double crochets (dc), at the end there is a connecting stitch again.
In the 2nd row: 3 ch. rise, again 3 ch, 1 treble s/n in the next loop, 3 ch, 1 treble s/n in the next one - repeat the pattern until the end of the circle, then connect. column.
In the 3rd row: 3 ch. lifting, 2 tbsp. s/n in one loop, *3 treble s/n in the next loop, repeat from * to the end of the row, at the end there is a connecting stitch.
In the 4th row: 3 ch. rise, 3 treble s/n in the next stitch of the “fan” of the third row, then * 1 ch, 4 treble s/n in the second loop, 1 ch again, repeat from * in a circle.
In the 5th row: knitting is similar to the previous row, adding 1 more treble crochet to each “fan” of the pattern. In the 6th row between the fans there are 3 vp, in the 7th - 9th rows - 4 vp each.
From the 10th row we add loops, increasing the number of “fans” of the pattern. In the 10th row: 3 ch. rise, 3 treble s/n in the middle of the fan of the 9th row, * 2 vp, 5 treble s/n in the third v/p, 2 vp, 5 treble s/n in the third loop of the 9th row , repeat from * to the end of the circle.
Knit the next 3 rows in the same way, adding 1 ch. between the fans. Add fans until the diameter reaches the required value (here 32 cm).
After this we begin to make reductions. In the next 2 rows the pattern is the same, but without air loops between the fans. In the third we knit 4 stitches in each fan. In the fourth: 1 fan in the center of the fan of the previous row, the next one - skipping one fan. Having tightened the loop, we again knit the pattern element through the fan, repeat until the end of the row as shown in the photo:
We knit the next 2 rows in the same way, but without air loops between the fans. Then we start knitting an elastic band. We knit one row with st.s/n. In the next row: 3 ch. rise, 3 raised convex columns, 1 purl relief column, again 3 convex, 1 purl and so on.
The difference between a relief column and a regular one is that the hook is inserted not into the loop of the column of the previous row, but under the column (on the front side). We knit the loop as in a regular stitch. The reverse embossed stitch is knitted in the same way, inserting the hook under the stitch from the wrong side. We knit a loop as in a regular stitch.
We knit an elastic band 3 to 1 for 5-6 rows, cut off and hide the thread. The openwork beret is ready.
Trying to create an openwork peach beret with a sirloin pattern
This peach-colored model will look stylish in your summer wardrobe, and the beret size is 55-56.
To work, you will need cotton threads of a suitable color - about 100g, as well as hook No. 2. Pattern diagrams for this product can be seen below:
To begin with, knit 5 chain stitches and close the ring. We tie the ring according to the first pattern, at the beginning of each row we knit 3 vp. As you work, it is advisable to try on the beret so that you can adjust the diameter. Having knitted the rest of the part, we begin to knit the sides according to pattern 1a, knitting 3 cm in this way. A flower for decoration can be knitted at will, using pattern 16.
For girls, you can also knit an openwork summer beret using patterns with descriptions. This model is also suitable for beginners in knitting. The size in this master class is designed for a 2-year-old child; for an older child, the number of loops will need to be increased.You will need cotton threads with a density of 200g/50m (Holly or any other), hooks No. 2.5 and 2. Head circumference 45-47 cm.
At the beginning of knitting, we cast on 90 loops or as many as necessary, but their number should be a multiple of 6. You can use an elastic cast-on for this.
Using the fan pattern, we knit 5 treble stitches, rapport is equal to 6 loops. We knit a circle of the required diameter, in this case you will need to repeat the pattern 3 times. We make reductions according to the diagram.
Using a needle and threading it, we go through the loops of the last row and tighten the crown. The beret is ready!
Video on the topic of the article
For those who want to understand knitting in more detail, we have prepared a selection of video master classes:
A knitted beret is an excellent headdress and accessory. If you make it from cotton thread, then it can be worn in the summer. At this time of year, a beret will not only make a woman’s look special, but also protect her head from the sun’s rays. In this article you will learn how to crochet a summer beret with a diagram and description.
Summer crochet beret from Fashion Magazine
Light openwork knitted beret made of cotton thread is ideal for any outfit. You can make it from white yarn, or choose the color that predominates in your wardrobe.
We will need: 100 g of thin cotton thread, hook No. 1.5.
Beret size – 54-56
Description
We knit a chain of 6 chain stitches, and then close it into a ring with a connecting post. Next, you should continue knitting as indicated in the diagram, starting each row with 3 air loops for lifting.
Knitting pattern for a headdress
The finished product must be washed and then starched. Then give the required form and let dry.
Openwork crochet beret with flower
This beret model is suitable not only for summer days, but also for warm autumn. The design of the headdress is simple. Even beginners will be able to do it. Thanks to the flower, the headdress looks very elegant.
Before starting work we need to cook yarn with a composition of 50% cotton, 50% acrylic, hook No. 2.5.
The size of the finished product is 54-56 cm.
Description
Please note that knitting will take place in 2 threads. We start from the top of the head. We fold the thread into a ring, then tie it with 11 single crochets. Next, we pull the non-working thread so that the ring tightens and close it with a connecting post.
We start the second row with 3 lifting chain stitches, knit 2 double crochets in each loop of the previous row and finish it with a connecting loop.
We also start the third row with 3 chain stitches, continue with *1 double crochet in the next stitch of the previous row and 2 more double crochets in the next stitch of the previous row*. It turns out that there will be 2 double crochets in one base. Next we repeat from * to *, and end each circular row with a connecting loop.
We start the fourth row with 3 lifting air loops.
Then we knit *1 double crochet in the next stitch of the previous row, 1 more double crochet in the next stitch of the previous row and 2 more double crochets in the next stitch of the previous row*. Repeat knitting from * to *, and end each circular row with a connecting loop.
We continue to knit according to the pattern until the beret reaches the desired diameter.
How to knit a women's beret - diagram
For a product diameter of 26 cm, you need to knit 13 rows. Then 3 rows of double crochet without increasing the loops, and then we begin to decrease the loops. To do this, you need to divide all the loops into 14 parts and knit * 9 double crochets, 2 double crochets together *. From * to * repeat 4 times.
We complete the knitting with a relief elastic band, which we do in this way: *1 double crochet located in front of the work, 1 double crochet located behind the work.
When the work is ready, you can decorate it with an openwork flower.
Creating a flower decoration
A knitted flower can be used to decorate not only a headdress, but also a dress, jacket, headband, etc. It can also be used as part of a scrunchie or necklace. Knitting a flower is easy even for beginners.
We will need the same yarn as the main product, and you can experiment with color, if desired.
Description
We knit the flower in two threads, just like the main product. We cast on 75 air loops, into which we knit 2 double crochets in the second row. In the next row, first *we skip 2 loops, and through the third we knit 7 double crochets, then we skip 2 loops again and in the third we knit a single crochet*. We repeat knitting from * to *.
Crochet flower pattern
When the ribbon for the flower is ready, it needs to be rolled in a spiral and then secured with thread on the reverse side.
Crochet summer hat for women
A DIY knitted summer hat – what could be better? It will certainly make you stand out from the crowd and attract many admiring glances. It will perfectly harmonize with both dresses and a T-shirt and shorts.
To create it, we will need 400 g of “Tenderness” yarn or another thread with a composition of 47% cotton, 53% viscose, as well as hook No. 2.
Description
Traditionally, we start knitting with air loops. This time you need to dial 8 of them. We close the finished chain into a ring and knit 24 double crochets into it. Next we knit 8 wedges according to the pattern.
Finish knitting next to the “crawfish step”.
The front step is one of the finishing elements that is performed from left to right along the front side.
One way to do it is to insert the hook under the loop, grab the working thread and pull it through so that there are 2 loops on the hook. Then you need to knit them from the working thread. Continue tying until the job is complete.
Delicate beret cap for beginners
Summer peach beret for women, crocheted
Another option for knitting a light headdress with an openwork pattern that will complement your look on hot summer days.
The size of the finished product is 55-56.
To create it needs to be prepared 100 grams of peach cotton thread with hook number 2.
Description
We knit a chain of 5 chain stitches and close it into a ring. Then, we tie it, as diagram 1 shows, starting each row with three lifting air loops. While knitting, from time to time, it is better to try on the beret to adjust the size. When the main part of the product is ready, you can start making the side according to scheme 1a. Its width is 3 cm. If desired, you can tie decorative flower, as diagram 1b shows and decorate the headdress with it.
Beret knitting patterns
Crocheted beret using Irish lace technique
It will take a long time to create such beauty, so we must be patient. But, on the other hand, the result will exceed all expectations. The product can be worn on cool summer evenings. It is also suitable for warm autumn.
We will need: 50 g of Iris yarn with hook No. 1.
Product size 56.
Description
First, we make a pattern in the shape of a circle, the diameter of which is 32-33 cm. Then we knit the flowers according to pattern 1, and the leaves according to pattern 1a.
Lay out the finished motifs on the pattern and secure with pins. When you get the desired composition, sew the elements together with bobbin threads.
Next, we remove the pattern and tuck the ends of the threads into the elements. In order for the resulting fabric to take the shape of a beret, its edge should be tied with arches of air loops and single crochets, and then gathered to a size equal to the circumference of the head. We finish knitting with a headband of single crochets and air loops. The width of the rim should be 3 cm.
Super lightweight crochet beret
This headdress for women is made of cotton thread and very openwork. Thanks to this, it can be worn even on the hottest summer days. The execution scheme is very simple and accessible even to novice needlewomen.
For this work we need: 100g Yarn Art cotton yarn, hook number 1.
Description
First we knit the crown with a diameter of 30 cm according to the pattern. Then we make several rows with arches of 6 air loops without adding. You should get a strip of about 4 cm. And after that, reduce the loops to the required head circumference. We complete the knitting with three circular rows without decreasing.
Knitting pattern for a light headdress
Now let’s knit a hat for the future woman, because the love of beauty must be instilled from childhood. For this knitting needs to be prepared: 50g of yarn “Elena” pink and beige (50% cotton, 30% viscose, 20% PCE), hook No. 1.4. The hat is designed for a 12 year old girl.
Description
The hat should be knitted alternating colors. We do rows 1-6, 8-11, 14-17, 20-22 in pink, and rows 7,12-13,18-19 in beige. We knit rows 18-19 with a double crochet, knitting together every 8-9 stitches. And in the 20th row we knit a mesh of double crochets and air loops. We knit rows 21-22 with a single crochet and decrease the loops to the desired diameter of the product.
Knitting pattern for a summer headdress
Knitted berets create a special style for a woman. She doesn't look like everyone else, maintaining her individuality. It is especially pleasant to wear a beret made by yourself. So, inspiration and success in your creativity, dear needlewomen!
The beret began its history as a headdress intended for various branches of the armed forces. Over time, the soft cap gained unprecedented popularity and began to be used as fashion accessory. Crochet summer berets have a special femininity. Such a headdress will not only protect your head from the scorching sun, but will also help create a unique romantic image, because berets are typically worn by sensual people and people of creative professions.
We invite you to find out how to link openwork hat for the summer for girls, women and babies. In the article you will find useful tips by calculating the size of the beret, and the abundance of provided patterns will help you choose a pattern that suits your desire and level of complexity.
History of the hook
They knew how to knit with knitting needles already in Ancient Greece and Rome, but the crochet hook began to be used as a handicraft tool only centuries later. The Middle Ages are considered the time of the birth of craftsmanship. They began to use crochet hooks only in the 16th century, when manufactories appeared. The instrument itself was borrowed by needlewomen from a related craft - tambour embroidery.
The Industrial Revolution made it possible to create mechanisms for processing the materials from which yarn was made. While manual labor was used for this, only noble ladies could afford even knitting, and what can we say about crochet, for which the thread consumption is 1.5-2 times more. Gradually, simple fabrics gave way to the finest openwork, and lace knitting was born. Only minor changes made to any scheme could completely transform the final result.
Once a needlewoman picks up a crochet hook, she will make it her companion for many years, using it to create fantastically beautiful objects. The tool can be used to finish furniture, accessories, wardrobe and interior items, and toys. But this is not the only reason why the hook is popular - it is very easy to master both in childhood and in adulthood.
Knitting Basics
Thanks to round shape the bottom of the beret, can be used circular knitting, which is simple. It is enough to have a basic knowledge of crochet to make a luxurious hat. Just choose a pattern and work in circular rows. When the circle reaches the required diameter, make decreases to shape the side of the product according to the size of your head.
The second, no less common option is to create a hat from motifs. In this case, individual motifs are knitted according to the chosen pattern, which are connected into a round fabric during knitting or by stitching. Along the edges of the bottom, 2-3 circular rows are performed without increments. Then reduce the diameter of the beret until it fits comfortably on your head.
Taking measurements and calculating diameter
If you decide to knit a lace beret, you need to decide on the size of the cap. It consists of a base, called the bottom, and a side. The volume of the beret depends on the difference between the diameter of the bottom and the decrease in the formation of the side. The height of the side is also important, on which the overall height of the product depends.
To knit a beret, you can use almost any pattern, but you need to decide on the size of the product in advance. To do this, take measurements and calculate the diameter of the bottom.
The approximate dimensions of this part of the cap can be taken from the following table:
Description of calculations. The length (L) must be divided by the number π*2 to calculate the radius. The radius R (inner circle) is used to calculate the circumference of the side so that the cap fits normally around the head. The second radius (of the outer circle), indicated in red in the figure, should be 3-7 cm larger than the first, thus, it is possible to obtain a more magnificent cap.
Let's look at a specific example. Let’s say the circumference of the head is 50 cm. Using the formula, we calculate the size of the inner circle, it will be equal to 8 cm. To get a voluminous product, add 6-7 cm to the value, we get the radius of the outer circle 14-15 cm. First you need to knit an openwork “pancake” "with a diameter of 14-15 cm, and then reduce the number of columns so that the radius of the inner circle becomes 8 cm.
Female models
So, you know how to tie a beret, let's get to work. We invite you to practice knitting a beret cap with a flower pattern. The work is very simple and suitable for beginner craftswomen. To make a beret for a head with a girth of 52 cm, you will need:
- hook No. 2;
- fine yarn 250 m/50 g.
It is better to choose cotton threads, as they “breathe” and practically do not shrink. This product will last a long time.
The work is performed according to the following scheme:
To start working, close five air loops into a ring. Further knitting is carried out according to the attached pattern. In the process of work, a pattern is formed in the form of a flower of 6 petals. When the warp is tied, check its outer radius. If you need to increase it, work several rows with double crochets.
Each petal at the end of knitting consists of 24 double crochets. To decrease evenly, work 8 rows, removing 1 stitch in each section (distance between petals). The result will be 16 loops in each section. If necessary, continue to decrease the loops until the required size is equal to the circumference of the head. Knit the last row with single crochets or crochet steps.
The beret with a flower pattern is ready.
Others are carried out similarly summer hats. In this case, the side can be made not only with double crochets, you can use any openwork pattern and even come up with it yourself! We offer you several patterns of adult hats in the photo; you will definitely choose an option that will help you create a unique image.
Beret for baby
Let's consider another option for knitting a beret, when the work begins not from the top of the head, but from the side. Beretik for girls is knitted from thin cotton yarn. It is better to use a hook with a small head No. 1.5-2.
The work is carried out according to the following scheme:
Summer has come! This means that we will face a huge number of hot days, with scorching sun and cool, sometimes rainy nights. But no weather should be an obstacle for a woman to look stylish.
In the summer, you want to not only look beautiful, but also feel comfortable in your clothes, and especially in hats. Designers from many countries use berets in their collections. Now women's summer berets are very relevant. In fashion boutiques you can find a huge number of summer berets of different styles and colors. But nothing beats something made with your own hands. With the help of a hook, yarn and your limitless imagination, it is possible to create your own individual and incomparable summer beret.
Knitting an original summer beret is very simple. Due to the variety of materials, knitting and patterns, a women's summer beret will complement your look with a bright and matching component of your wardrobe. Crochet The beret is a beautiful element of the image, making the outfit whole and complete. It will draw attention to you and emphasize your individual style.
Crochet summer beret, models from our website
The classic, black and white version of a large beret and a small shawl will allow you to use the beret both as protection from the sun and as a detail of an evening dress. The shawl can be used to cover your shoulders from the sun or the evening cool, or use it as a pareo
Read completely
To make the dress and beret, 400 g of black cotton thread “Kable” 400m/100g, a skein of braid with glued beads, and a 2.0 hook were used. For a product according to this description, you can use any yarn, thin and thick, cotton and synthetic,
Read completely
Hello, dear craftswomen! What a drug this is - knitting! I wanted to take a little break from knitting and direct my energy in a different direction, but I couldn’t switch. I saw the beret and couldn’t do anything, again
Read completely
I think that this white beret is known to almost everyone who crochets. It was published in Fashion Magazine. So I didn’t pass by. Crocheted number 1 from thin threads, so it turned out to be slightly smaller in diameter than
Read completely
Hello, dear needlewomen! Ah, summer, summer...... it's time to show off your work on your body! My new work is a summer beret in the style of Irish lace. Idea by Zoya Leporskaya from Fashion Magazine No. 541. Knitted from leftover yarn. Flowers,
Read completely
Hello, dear needlewomen! I tied the beret. He waited a long time for his time. I have had a series of such berets. I took the idea from Fashion Magazine No. 535. Author Tatyana Prokhorenko. Yarn: 100% mercerized cotton 280 m in 50 grams, hook 1.0
Read completely
Summer beret "Lily", 100% cotton. Knitted according to the attached pattern. The work begins from a chain of 6 chain stitches and is tied with 16 double crochets, then according to the pattern. Hook No. 2, Yarn Art Violet thread. Beret knitting pattern:
Read completely
Summer beret made of thin cotton for a girl. The beret is made according to the presented pattern; the last rows in the pattern can be adjusted by yourself (knitted or not depending on the desired circle). I didn’t make the border according to the pattern - I liked it that way.
Read completely
For knitting, use 100 g of Yarn Art cotton yarn, hook No. 1. I knit the bottom of the beret according to the pattern up to a diameter of 30 cm, then without adding arches from 6 vp. 4 cm, then decrease to the required size - head circumference.
Read completely
Good afternoon I bring to your attention a light openwork beret. Summer is coming, and such a beret will protect your head from the burning rays of the sun. Knitted from Turkish yarn "Violet" - 282 m / 50 g, hook No. 1.75. I used 1 skein -
Read completely
Warm beret knitted using the Irish lace technique. The threads used were Alize (gold batik), Linete (angora). Motifs were knitted according to the following patterns: leaf, caterpillar, flower: 1st stitch: 7 ch. in the ring, 2p. 1 v.p. rise, 17 st.b.n. knit into a ring, 3 r. 4 inch rise, *
Read completely
Beret made using Irish lace technique. Made from "Iris" threads using crocheted size 1.0. It took 50.0 grams. Before this item, I had never knitted Irish lace, so I decided to start with a small item. Then curiosity got the better of me. And after that, I
Read completely
The summer beret is crocheted from mercerized cotton "Pelican" with crochet size 1.25. A white hat elastic band is tied into the headband for better fixation on the head. Artwork by Nina Kolotilo. Crochet beret pattern:
Read completely
All berets are knitted using the Irish lace technique. The yarn used is mainly "Diamond" 50% wool + 50% acrylic - 380m/100g, and "Alize" 100% microfiber - 300m/50g, hooks - "Clover" - 0.75; 0.9; 1.0. All elements can be found in the Journals
Read completely
Crocheted beret - the work of Nina Kolotilo. The dusty rose colored beret is knitted with Irish lace. Size 56 - 58. Yarn for the elements - Anna-twist 500m/100g, for the mesh - also Anna-twist, but untwisted and the resulting thickness is 1000m/100g.
Read completely
The author of the work is Elena Nikolaevna Trofimova, place of residence Perm region, Berezovsky district, village of Zaborye. I work as a teacher of additional education - I lead the association "Magic Ball" - this is knitting and crocheting. Beret knitting pattern:
Read completely
I am Kartoeva Milana Amirkhanovna, I study at school No. 12 in the 7th grade, I learned to knit in a club. I have been knitting for 8 months and have gained a lot of experience on this site. I live in the village of Inarki. I'm now
Read completely
Due to numerous requests, Reseda sent a diagram for the beret. She knitted the beret to the end of the pineapple pattern, reduced the number of loops, and knitted the headband around the circumference of the head with a single crochet. I used hook number 2. Beret knitting pattern: See the handbag knitting pattern at
Read completely
To knit a beret you will need: 200 g of yarn, hook No. 3. Knit an openwork circle according to the pattern, then knit into each arch of 3 VPs 3 unfinished columns with a common top and 2 VPs between them.
Read completely
A voluminous beret for summer, decorated with beads and beautiful buttons, will give you a unique personality. Beret size: 56-58. You will need: 150 g of white cotton yarn; hook No. 2.5; plastic beads and buttons for decoration. Tie the bottom of the beret according to the pattern. After
Read completely
Good afternoon My name is Guzel Fattakhova, I have been crocheting for myself and to order for a little over 2 years. Once I already sent my work - a sexy tunic with a spider web. This time I decided to show my
Read completely
Openwork summer beret, crocheted- Christina's work from our forum. Beret size: 55-56. Description of the beret from the magazine: You will need: 100 g of yarn “Lily” (280 mx 100 g, 100% cotton) white, hook number 2; decorative brooch.
Read completely
The beret is a universal headdress. Berets come in winter and summer, thick and thin, openwork and dense. There are so many models of knitted berets that it’s dizzying. Look at this model of an openwork beret, you can easily put it on
Read completely
My name is Trunova Irina. I live in the city of Michurinsk, Tambov region. I am 21 years old. I am a student at Michurinsky Agrarian University. I have been interested in knitting since childhood, as my grandmother was a dressmaker and knitter. I also really love embroidery.
Read completely
Takes from floral motifs - the work of Marina Milokumova. The non-trivial beret model is very relevant for the upcoming cold weather. Schemes from a Japanese magazine. Marina writes that connecting motifs takes some time and requires care. But she liked the result
Read completely
This beret is crocheted based on the pattern from Mod magazine No. 470. Please note that the main motif is repeated twice by Tatyana. Yarn - iris, hook 1.25. The diagram is given for head size - 56. You will need about 100
Read completely
Knitted berets are suitable for any age, be it a little girl, a girl or a woman. The beret is considered a classic in the world of hats and an element of French style.
A knitted beret looks very elegant on a little girl, especially if it is knitted from a thin thread. This beret not only does not cause any discomfort to the child, but also perfectly protects against overheating and hypothermia. Also, by decorating the beret with beads, ribbons or other jewelry, you can combine it with different outfits and accessories.
Winter, summer, autumn. . . You can crochet a beret for any season. It will not be difficult for you to knit a beret from fluffy and thick yarn for the winter or thin and soft for the summer. Our product will help you vary the knitting density, patterns, size and color detailed description and diagrams. Even a beginner can cope with this task. You just have to be patient and be confident in your results. You can turn a skein of yarn into a work of art. We will make every effort to help you with this!
Crochet summer beret, models from the Internet
Summer openwork beret Ripe strawberries
Work by Irina Kachukova. Hook No. 1.75. The front side of the beret. Beret diameter = 28 cm. The diameter of the beret should be approximately equal to 1/2 of the head circumference, i.e. for size 56 (56 cm), the diameter of the pancake should be somewhere around 27-28 cm.
Beret pattern:
Summer Beret Rainbow
Work by Irina Kachukova. The beret is crocheted No. 1.5. Threads are mercerized cotton.
Summer beret Surf
Summer beret with daisies
Beret size: 56.
You will need: 100 g of white yarn (100% cotton, 530 m/100 g), 10 g of yellow yarn for the centers of flowers (100% cotton, 565 m/100 g), 15 g of light green yarn (80% polyamide, 20% metallic , 340m/90g) hook No. 1.2 for flowers and No. 0.9 for mesh; polystyrene foam (4 cm wide) covered with tape; pins with a bead at the end, 7th grade Brother knitting machine.
Crochet summer beret, job description
Before starting work, make a beret pattern; the outer circle (bottom) with a diameter of 28-30 cm and the inner circle with a diameter of the outer circle of 28-30 cm, the inner circle - 16-18 cm. The diameter of the inner circle is calculated as follows: the circumference of your head minus 2 cm for a tight fit, divided by 3, 14. If this is a standard head circumference (56-2): 3.14 = 17.2 cm.
So, the diameter of the small circle is about 16-18 cm. Tie together the elements: flowers (diagram 24, 24 a), leaves (diagram 24 b), leaves on branches (diagram 24 c). Lay out the finished elements on the pattern with the wrong side up, making bouquet compositions (for an option, see cx 24 g), secure with pins. Use polystyrene foam as a backing. Connect the bouquets together with an irregular grid in a circle (this is important), especially along the edge of the circle. Try to ensure that the mesh along the edges does not stretch into a line, but is in the form of rounded arches. Inside the circle, the knitting direction can be arbitrary. Thread the ends of the threads into the elements. Similarly, assemble the inner circle part.
Fold the two finished parts with the right sides facing each other and connect them together as follows: RLS with loop grip (under the arch), both parts, 5VP.
The seam should be movable and not tighten the fabric.
Knit the headband on a machine (“Brayer” 7th grade on density 4) 20 stitches in stockinette stitch 230-240 rows from “Iris”. It can be knitted on thin knitting needles by calculating the density yourself.
Tie the headband in the same way as you connected the beret parts. Sew the ends of the headband using a knit stitch. The rim itself will curl beautifully into a roll. You can fix it at the place where the ends are sewn together.
Summer crochet video
Summer openwork beret for beginners part 1
Size: 56-58.
Yarn: baby cotton gazzal (225m/100g).
Hook No. 2.5.
Summer openwork beret for beginners part 2
The video should load here, please wait or refresh the page.
A very simple crochet beret pattern
Beret size: 56-58. Yarn Pekhorka Pearl (425m/100g), 50% cotton, 50% viscose. Hook No. 1.5-2.
The video should load here, please wait or refresh the page.