How to sew a thing along the seam. How to sew up a hole in a jacket so that the seam is not visible? Work materials

My greetings to all! Small holes are most often formed on knitwear. We will answer the question: how to sew up a small hole on T-shirts, pants, dresses so that it does not stand out and clothes can be worn.

Invisible darning

On any clothing, but especially on knitwear, a tiny hole can simply appear out of nowhere, ruining the whole look. Most often they are found after washing. The thing is good, but it is no longer possible to wear it, what should I do?

So that the hold does not increase in size, we will try to sew it up, so that it is not visible. If you start working with simple threads, then you can pull off the matter and this place will catch your eye.

Let's not rush.

• Take the thinnest needle, the one used by embroiderers with beads.
• Find tights that match the color of your T-shirt or are neutral.

Stages of work:

1. Pull the thread out of the tights.
2. Thread into the needle with a needle threader. Do not tie a knot!
3. We work from the front side of the product. Carefully collect all the loops with a needle. We catch them from below and from above, one loop at a time, then we make a stitch without pulling the fabric together.
4. After finishing darning, bring the needle to the wrong side.
5. We fix the thread with a couple of stitches, then cut it off.
6. We straighten the fabric, iron the place of repair with an iron from the inside. The nylon thread will melt slightly under the influence of high temperature, thereby closing the hole.

Repairing things without a needle

It's sad when a small hole is found on a T-shirt. T-shirt can be thrown away, but it is better to repair. We can still throw it away!

This method is not suitable for silk or wool products.

There will be no trace left on a knitted T-shirt if you do this work:

• Turn the product inside out.
• Bring the edges of the hole together.
• Put a tape for gluing fabric on it, and interlining on top.
• Put a small piece of white fabric on all this so that the design does not move.
• Spray the fabric with a spray bottle. Then put the heated iron in place of the patches, hold for 10 seconds.
• Remove the fabric, turn the product inside out.

How to repair a sock

This problem is familiar to every hostess.

Stages of work:

Repair of thick knitwear

The demonstrated method is suitable for any item made of thick knitwear, including woolen socks.

Operating procedure:

How to raise the loops at the seam

Stages of work:

If such a hole, as in the picture below, then take the tone-on-tone threads.

Three ways of darning

This method is suitable for repairs in inconspicuous places.

Darning pattern in the classic way:

Before starting work, thread around the hole to save the fabric from stretching. After work, it will need to be pulled out.

The next option is to glue the adhesive material from the inside, then make embroidery on it. And you can make a patch on the "cobweb", glue it, then make embroidery on it.

For the most experienced dressmakers, such options are suitable.

You can also watch a video on how to darn a small hole:

Goodbye: now all things will be saved, because there are many ways to sew a small hole on any.

A hole in the toe or heel is one of the most common "damages" to the toe. It happens that there are no threads of a suitable color at hand - for example, in the country or on a trip. This life hack is about how to sew a knit with a seam in which the thread is not visible from the front, so you can use any color. In addition, there is no need for special devices, as with darning. Please note: this method is not suitable for very visible places. It's more like a life hack for quickly fixing a torn one.

You will need:

Hand needle;

Work sequence:

1. Thread the needle, make a small knot. Do not turn the product inside out. Pass the needle through the hole inside out of the jersey and leave the knot there.

2. Start sewing up the hole, grabbing one or the other edge in turn. Proceed as shown in the diagram.

3. When finished sewing, pull on the thread. Pull until the thread goes into the seam, becoming invisible from the right side, but not pulling the seam. You can always stretch the seam to the sides to spread the thread a little. Bring the needle inside out and fasten off the thread.

More clearly in the video:

2. How to sew a broken line with a hidden seam: a master class

In this case, the blind stitch from the previous life hack is also used. A detailed master class on how to make this seam,.

The method is suitable for repairing a broken or torn machine stitch where it is not very convenient to sew up a hole from the inside out. For example, this way you can sew up a hole in the lining, on the inside pocket, and so on. By the way, with the same seam, you can repair a torn hem of trousers or a skirt.

You will need:

Hand needle;

Work sequence:

Follow the seam as shown in the photo or in the diagram from the life hack above. At the end, carefully fasten the thread.

More clearly in the video:

3. How to sew a small hole in knitted knitwear: a master class

We already wrote about how to quietly sew up a small hole in thin knitwear (master class with video). The same master class is about how to repair thicker knitwear, for example, a knitted sweater, pullover, jacket. In the same way, you can sew a thick knitted sock or any knitted item.

You will need:

Thin threads in the color of the thing;

Hand needle.

Work sequence:

1. Turn the item inside out. Thread the needle. Start picking up small stitches across the direction of the threads in the knitwear. Move up and down, threading to the end of the hole.

2. Now, with the same stitches, walk perpendicularly along the direction of the knitwear threads. With each movement of the needle and weave it with laid stitches, and grab a little material of the thing being repaired.

3. As a result, the work should look from the inside, as in the photo below. Secure the thread with a few small neat stitches and cut the thread. Ready.

Photo and source: blacksprucehound.com

4. How to raise loops and sew up a hole in knitwear near the seam: a master class

Such a hole near the seam is a fairly common occurrence. This master class is about how to carefully pick up loops and repair a sweater.

You will need:

Hook of suitable size;

Threads, in thickness, color and composition suitable for repaired knitwear;

Safety pin.

Work sequence:

1. Crochet one by one, pick up the runaway loops.

2. Raised chains can be fixed with a safety pin so that they do not run away again.

3. Having picked up all the runaway chains of loops, close them with a hook, successively stretching one loop through the other.

4. Fix the last loop with a thread with a needle.

5. Sew up the hole with the same thread.

5. How to raise the loops and sew up a hole in the knitwear: a master class

To repair knitted knitwear, it is good to use a knitted seam - a particularly inconspicuous work is obtained if you have the threads from which the item is made. A knitted seam is good when the hole did not arise due to fraying, but, for example, due to a hook, when the thread in the knitwear is pulled out and torn.

You will need:

A hook of a suitable size (if you need to pick up runaway loops);

Well fitting threads;

Work sequence:

1. Pick up the runaway loops with a hook.

2. Thread the needle and start collecting loops as shown in the pictures. A contrasting thread is specially taken here so that the principle of operation is clear.

3. Having collected all the free loops, bring the thread to the wrong side. Fasten it by passing between the loops of the material, as shown in the photo. Scraps of a torn thread are also brought to the wrong side.

Photo and source: tashamillergriffith.com

6. How to mend a hole: three ways

Darning is a classic repair method. Helps with holes in knitwear and fabrics. The degree of inconspicuousness of the repair depends on the size of the hole, the material itself (it is very difficult to make an inconspicuous darning on silk or other delicate fabric) and skill. Most often, darning is used to repair things in inconspicuous places. But its main function - getting rid of the hole - it performs.

You will need:

Threads in the color of the fabric;

Hand needle;

- "fungus" or other device for darning.

Here is a diagram of a classic darning:

Before starting work, you can walk the thread around the hole so as not to stretch the material with a darn. In the process of work, you can not touch this thread and then pull it out.

Special darning for knitwear:

First, auxiliary threads are pulled with a thin thread, then a darn is placed along them with a thread suitable for the repaired canvas.

Another darning option for knitwear:

First, threads are laid along the threads of the canvas, then darning is performed.

Greetings, dear readers. All of us, from time to time, face embarrassment. One of the same embarrassment is the appearance of a hole in the jeans. Some people can throw away jeans, but what if jeans are your favorite? They don't want to throw them away at all. In this article, we will look at how to mend jeans without a patch if you have a hole or a cut.

How to sew up a hole in jeans without a sewing machine?

Holes can be sewn up by hand if they are made at right angles. Since you will not be using patches, you should choose threads that match the color of the jeans.

After you have threaded the needle, make even and neat stitches from one side to the other, then tighten the thread, making stitches in such a way that a kind of mesh is obtained.

Do not forget to alternate the thread: then from above, then from below.

How to mend a hole in jeans on a typewriter?

Just sitting down at a sewing machine and getting beautiful and even stitches will not work. This requires some experience.

In order to sew two edges of the product without a patch, you need to pull the edge very well to get even stitches.

It is better to sew two edges with a zig-zag stitch, connecting the edges as often as possible. Threads also need to be selected according to the color of the product.

How to sew jeans without a pocket patch?

Pockets on jeans can be laid on and sewn in. If they are overhead, then you can easily use a sewing machine.

If the hole is on the inside of the product, you need to turn it inside out. But sometimes, pockets can consist of several layers of fabric, then it is better to use your own hands. It is better to sew on or near the finishing stitches to make it easier to sew.

But if your cut is not on the inside of the pocket, but, for example, on the lining, then it is worth replacing it. If the pocket is completely worn out, then it is worth completely removing the pocket and sewing on a new one.

If the pocket just has a seam, then you just need to sew it with a machine stitch.

How to sew up a hole near a pocket?

If the holes are large enough, then it is easiest to open a pocket and sew it with a hand or machine line with plain threads.

If the hole is small, then it will be easier to sew the hole to the threads that already hold the pocket. This is especially true in situations where the cut is literally near the pocket.

Important! Choose threads of the same color that the entire product is sewn on, and not the color of the product. They may differ.

How to mend a burnt hole?

A fairly common situation for those who spend a lot of time in nature, for example, by the fire, or those who smoke. But sometimes it can happen by accident.

In this case, our advice to you is to carefully cut off the melted or burnt edges of the product in order to make the hole as invisible as possible.

Pick up threads that are the same color as the threads of the trousers themselves. You can easily sew both edges with your hands. Use a zigzag, but first turn the product inside out so that the threads do not stick out on the front side.

round holes

Round holes must be sewn up in exactly the same way that you sew up burnt holes, because both there and there a round hole is formed, in which you also need to turn the product inside out and try to darn it by hand.

Hole in the knee. How to sew?

Holes at the knee are a special case, as these are the places where the jeans have the greatest load.

In these places, most often the fabric is frayed and torn, especially when a person gains weight. To connect such holes, you need special skills in sewing.

The edges must first be darned with a needle, and then connected even seam between each other with threads of the main color of the product.

hole in jeans between legs

If the hole was formed along the factory seam, then it is not difficult for you to sew it up. Fraying on jeans between the legs is the second main cause of holes. Especially when you wear stretch jeans.

It is on these types of jeans that the most a large number of holes. For work, also pick up the threads to match the jeans. Next, start sewing stitches from one side to the other, and then go back. After you have stitched the threads on one side, proceed to the other.

For example, you started with a horizontal line, now proceed to a vertical line. On top of such a “mesh” darning, proceed to the same similar darning, only from above for a tighter fastening of the fabric. This type of suture is called a "piece".

But you can patch up trousers without the help of hands and needles, and use only a typewriter.

How to get rid of blemishes

Sometimes it happens that there is no hole, but it is about to appear on your product, but for now there is abrasion in its place, large or not.

You need to turn the jeans inside out and gently fold the edge that is most worn in the product. Now you can gently patch it up with the machine, leaving a small, neat seam in place.

Usually, such holes are small and inconspicuous. And this is the hardest. It is harder to sew up small holes than large ones.

To do this, you need to take the threads of the same color as the product, slightly bend the edges of the hole and carefully connect them, using a line with only one row. But it is necessary to sew up very tightly, since the soft spot of our body is subjected to a large tissue load.

If you think that sewing black jeans and regular jeans is something different, then you are deeply mistaken. Black jeans are easier to sew up, as they are most often solid and the threads are easy to match, unlike the classic look of jeans, which can sometimes be difficult to match with a color that matches the color of the product.

If you liked the tips on how to sew up jeans without a patch, then share this article with your friends by pressing the buttons of social networks.

Yes, this is a banal situation that everyone has probably fallen into. Imagine putting on your favorite T-shirt or pulling on comfortable pants. And suddenly you notice a hole. And it looks great!

Of course, you can sew up the hole, but if it is in front or behind, then the result is unlikely to please. Alas, you have to throw away your favorite thing ... or not?

There is an exit?

Yes, there is a simple but ingenious way, by applying which you will forget about the annoying incident. And, for him, you do not need to get the thread. The process itself is quick, taking about 11 minutes. Required Tools you can easily find in any of the hardware stores. Go once and buy, after which you will forget about this problem for a long time ..

What will be required:

• the affected thing with a hole (not bad if the hole is small, somewhere up to 0.5 mm);
• iron;
• ironing board;
• parchment paper;
• special spray gun, with water;
• white cloth;
• gossamer tape, it is taken for gluing fabric;
• thin interlining (adhesive).

Procedure:

First, carefully spread the parchment on top of the board. He will protect her from the consequences of the "experiment".

Now carefully turn the affected item inside out and place it on top of the sheet on the board. Bring the edges of the hole tighter so that they touch and the hole disappears.

Cut off a piece of gossamer tape, which is used to glue pieces of fabric (it is easy to find in specialized fabric stores). Put it more tightly on the hole, and put a piece of adhesive interlining on top (buy it in the same place where you took the gossamer tape).

Set the iron (if available) to the "Wool" mode. Now lay a piece of ordinary, white fabric on top of the thing, trying not to touch the patches. Spray it with a spray bottle. Remember the place where the patch is located under the fabric and place an already heated iron on it.

Install it, don't drive it, otherwise you can shift the patches. Just hold it for 10-15 seconds. Do not be afraid, the fabric will not burn through, especially if the iron is a modern model.

After removing the iron, carefully remove the white cloth, then turn the affected item inside out. Check how the threads stuck together that were around the hole. If unsuccessful, repeat the manipulation.

The method is simple, beginners usually spend 10 minutes. But when the technology is known, it takes much less time. Moreover, this method is considered more effective than darning. It is faster and, most importantly, a sealed hole is difficult to notice, even if the affected item is light in color. Sometimes it's hard to believe that there was a hole at all!